ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.
ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.
TengLi steel stocks a full range of A106 pipe (SA106 Pipe) in:
● Grades B and C
● NPS ¼” to 30” diameter
● Schedules 10 through 160, STD, XH and XXH
● Schedules 20 through XXH
Wall Thickness beyond XXH, including:
● Up to 4” wall in 20” through 24” OD
● Up to 3” wall in 10” through 18” OD
● Up to 2” wall in 4” through 8” OD
| Grade A | Grade B | Grade C | |
| Carbon max. % | 0.25 | 0.30* | 0.35* |
| *Manganese % | 0.27 to 0.93 | *0.29 to 1.06 | *0.29 to 1.06 |
| Phosphorous, max. % | 0.035 | 0.035 | 0.035 |
| Sulfur, max. % | 0.035 | 0.035 | 0.035 |
| Silicon, min.% | 0.1 | 0.1 | 0.1 |
| Chrome, max. % | 0.4 | 0.4 | 0.4 |
| Copper, max. % | 0.4 | 0.4 | 0.4 |
| Molybdenum, max. % | 0.15 | 0.15 | 0.15 |
| Nickel, max. % | 0.4 | 0.4 | 0.4 |
| Vanadium, max.% | 0.08 | 0.08 | 0.08 |
| *Unless otherwise specified by the purchaser, for each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.65% (1.35% for ASME SA106). | |||
